2012 to 2018 Research physicists phenomena, Sun, Earth, Energy in water and its properties, water management of the earth, product development for energy saving. environment and CO2 friendly applications.

Details regarding my experience:

My experience concerns an above-average creative capacity for a wide range of problems, design and practical applications.

Through experience for spatial and technical applications I have developed a talent for visualization, which enables me to become one with the environment and matter. I can move through a switching network of a computer or become part of an atom. In this way I can observe and understand actions and reactions in complex technical systems.

Characteristic for me is that I want to understand the background of technology, in order to gain the knowledge necessary to achieve my goals. Here I deviate from the trodden path, because if I do the same as another person, I will get the same result.

I don't just take something for granted. In this way I follow my own insights. Major Out of the Box to thinking. Setbacks are precious learning moments and contribute to your success through perseverance.

My human attitude is: Problems are opportunities and challenges.

We do everything we can right away. Miracles last a little longer.

Foreword

I would like to invite you to the exciting voyage of discovery to the Ultrasonic Hydrobooster.

First of all, I would like to take this opportunity to thank the people who have helped to turn the idea into a working model.

They have made a dream come true by combining new insights and direct applications in this design. My view is partly due to the beautiful description of the torus-shaped energy field by Caspar Pompe. Energy is movement. The toroidal field - the magic donut - occurs in everything around us from subatomic level via the mitochondria in our bodies to the entire universe.

Through uncharted paths, I have become convinced that energy generation is a relationship between Action, Response and Interaction. By using the toroidal field, the Ultrasonic Hydrobooster achieves a higher efficiency than the existing thermal techniques.

(Combustion, electrical convection or Infrared radiation).

Nikola Tesla and Viktor Schauberger have looked at how nature works. They are inspired by the sun, moon, earth and natural phenomena such as thunder. Why the earth rotates and how the rotation affects our water management. Our lives could never have come into being without water.

For us, water is the source of life energy, which in an incessantly reproducible cycle provides the earth with its life's need. Water Continuously goes through a natural cycle of evaporation, splitting into Hydrogen and Oxygen. Water is (according to M. Chaplin) a special material with at least 66 different properties.

For us, water is a 100% recyclable source of energy. The Ultrasonic Hydrobooster is an efficient application for turning water into an energy source. This is based on the physical principle that when a substance or element warms up, the molecules or atoms move faster.

This substance expands as a result - the ingested volume increases and thus changes. specific gravity and viscosity.

The water molecules get a higher frequency due to direct movement, kinetic Power, friction and cavitation. The higher the temperature, the higher the frequency of the molecules. You can also reverse that: the higher the frequency, the higher the temperature.

Vibrations at own frequencies of molecules and atoms form the field of resonance technology.

In the appendices you will find background information about resonance technology and the phenomenon of water. I think you will find this interesting.

I wish you a great deal of reading pleasure and look forward to your reaction.

1. Ultrasonic Hydrobooster for water energy

In this document I present the Ultrasonic Hydrobooster step by step. The Tesla Turbine forms the basis of the booster. I have added a number of processes to the Tesla Turbine in order to further increase the efficiency of the system.

The first process step takes place in a helix, which causes the spinning effect of energy/matter flows as discovered by Viktor Schauberger. The second step in the process is the adapted Tesla Turbine, which is used to heat the water.

High-quality materials in combination with resonance technology result in the operation of the Ultrasonic Hydrobooster. The Ultrasonic Hydrobooster consists of the following components:

a. Main shaft drive;

b. System energy supply by high-pressure pump;

c. Helix - water and energy concentration;

d. Adapted Tesla Turbine;

e. Internal Ultrasonic Hydrobooster with plates with ‘flutes’;

f. Output of Steam to Impeller;

g. High rotation speed due to steam acceleration - transmission to main shaft;

h. Steam production to Turbine for electricity generation;

i. Steam to heat exchanger;

j. Recirculation of electricity to pumps or electric motor;

k. Electronic process control.

The Ultrasonic Hydrobooster produces steam. Because steam has a broad field of applications, I will only give a brief overview of the possibilities in chapter 2. In chapter 3 I will discuss different paths from concept to product. For the readers who want to go deeper into the theory, I have added three appendices.

1.1. Main shaft drive

The system can be driven in two different ways.

1. With a large power circulation pump, where at start-up less forces are released on the water Impeller. Advantage, the speed of the drive shaft, will gradually increase and will reach higher rpm than with an electric motor.

The drive pump will deliver more than 420,000 litres per hour, which will serve 11.67 litres of 1.8 bar of thrust per second for the main axis. Disadvantage, higher production costs compared to an electric motor without frequency control and transmission ratio to achieve a higher speed. The choice of the solution also depends on the application of the Ultrasonic Hydrobooster.

2. Drive with an electric motor is more economical. Direct power transmission and speed are adjustable. However, a pulley transfer, or frequency control can cancel out the benefit of the cost savings. Here, too, the application of the ultrasonic Hydrobooster must determine the choice.

The prototype will be made in such a way that both a water impeller and an electric motor can be used as a drive. A small model can be equipped with a Dynamotor, which acts as a dynamo when it does not need to drive the system itself. The tension can be transformed upwards and directed evenly. This solution is interesting for the automotive industry to charge battery powered cars while driving.

This saves space, space and the cost of making the unit, reducing the need for a pump and impeller (impeller wheel) to drive the unit.

1.2. Energy generation by water

Energy is generated by the helixling current of the water through the Ultrasonic Hydrobooster. Where this energy comes from is a question that I would like to put to physicists. The water is pumped through the system with an adjustable pump (4000 Liter per hour) at an adjustable pressure up to 8 Bar. This pump feeds into a closed circuit of:

1. Heat exchanger;

2. Pump;

3. Helix;

4. Custom Tesla Turbine;

5. Ultrasonic Hydrobooster.

The choice of application determines how many cockles and improved Tesla Turbine per Ultrasonic Hydrobooster will be used up to a maximum of 4 per system. The improved Tesla Turbine has two different internal versions.

1.3. Helix – water energy concentration (Schauberger)

First, water is divided into seperate supply streams, in which the water flow rotates through a copper helix. This helix is located in a copper tube. The fixed left-hand turning helix itself is a fixed component (without rotating parts).

The water stream rotates and is also concentrated according to the discovered methods of Viktor Schauberger. This is where the first acceleration, overpressure, underpressure (Cavitation) occur at the entrance of the adapted Tesla Turbine.

An example is an outboard motor screw. One sees acceleration on the outside and under pressure in the centre of the water flow.

1.4. Adapted Tesla-turbine

A Tesla turbine consists of a housing with an inner work of round plates with a spacing of 0.5 to 1 mm. A connection has been made in the outer wall for the water supply. The water enters the turbine tangentially, so that the disk pack rotates.

The water flows from the outside to the holes in the middle of the discs and has to overcome two forces. First force is the friction of the water flow against the discs. The second force is the centrifugal force due to the high rotation speed of the package. The resistance to these forces heats the water.

This process repeats itself on the next level of disks, which then start running. The water flows through several disc layers until it finally reaches the exit via a funnel in the centre of the system.

The water flow between the disks, towards the center, has an equal flow rate. Each time a shorter path is taken to the city centre. This results in a difference in ‘confrontation speed’ on both sides of a disc, despite the equal supply.

In this game of under- and overpressure cavitation bubbles develop, which are locked up in between the discs. The bubbles are made up of steam. Steam has 1600 times the volume of the water from which it originates.

This steam is drawn to the direction of the holes in the center of the discs by the under pressure at the output relative to the overpressure of the input. However, a large number of bubbles will implode with high vibration frequencies being introduced into the water.

The operation of the upgraded Tesla Turbine relies mainly on cavitation.

The cavitation causes a turbulence that is 90° at right angles to the rotation speed of the water supply between the discs, causing more cavitation towards the exit. This phenomenon results in a steam water mixture that leaves the turbine.

The volume and power of the water that flows into the adapted Tesla Turbine ensures a very fast rotation of the disk package. The stacked vane wheels at the exit are mounted on the same shaft with three fixings and a lock ensures more under pressure inside the Tesla Turbine.

In the Ultrasonic Hydrobooster, the construction of the Tesla turbine has been adapted. The disks packets have a different spacing between the disks. On the drive side of the Ultrasonic Hydrobooster, spacing is 1 mm while the discs are centered at 0.5 mm from each other.

This will result in a higher temperature in the middle of the Ultrasonic Hydrobooster compared to the drive side. Lower tones are produced there. In the prototype there are two improved Tesla Turbines on both sides of the Hydrobooster.

1.5. The Ultrasonic Hydrobooster

The Hydrobooster is made up of different components and different techniques.

It can be built in different sizes or connected in parallel depending on the application. The question is whether a lot of heat, or more electricity is needed, can be set by means of control technology. The parameters influence the test results of the prototype to make optimal settings for different applications visible.

The Ultrasonic Hydrobooster transmits direct movement through various forces to the water. Energy generation will provide more efficiency by reducing losses in direct confrontation as well as in convection, radiation or combustion.

The efficiency of the Hydrobooster is very high. It seems that the Law of Conservation of Energy is not applicable here. But that is not possible. Considering the various characteristics of the Hydrobooster, external factors must play a role here. We therefore conclude that other types of energy are induced by the Ultrasonic Hydrobooster.

When drawing up the energy balance, the system boundaries must be extended. Do gravity or geomagnetism play a role? Therefore, we are not talking about the efficiency of the Ultrasonic Hydrocarrier, but about Coefficient of Production (COP), which is mostly used in the Geothermics.

We therefore advocate additional external scientific research into the functioning of the Hydrocarbons and the mysterious energies that apparently play a role here.

https://www.youtube.com/watch?v=U-uUYCFDTrc

The Ultrasonic Hydrobooster is an improved version of the Ultrasonic Hydropump an invention from 2006

https://www.youtube.com/watch?v=UBxpn6odtcA

https://www.youtube.com/watch?v=wAHNpCeGmDw&t=28s.

This version shows the operation of the Ultrasonic Hydrobooster. This version has been improved on several points, so that the Ultrasonic Hydrobooster will maintain itself (self-running).

https://www.youtube.com/watch?v=zbd50_hOy0U&t=65s

The construction with different plates - alternating with a blind plate and a slotted plate - creates so-called 'whistles'. This is also shown in the previous video. The version of the Ultrasonic Hydrobooster is more compact than the Hydropump, has many more flutes that increase in pitch towards the steam output.

The number of pan flutes varies depending on the size of the model.

These flute plates are mounted on an axis, whereby each flute can be seen as a tooth of a saw blade, whereby an overpressure and underpressure is created with each of the teeth.

The multiple overpressure and underpressure moments cause more noise.

The prototype has 8498 flutes, which add 80 different tones to the water. The pitch is determined by the circumference of the plates times the number of whistles per plate and rotation speed of the plates.

The axle with plates also has a flywheel function and gives self-propulsion. The density, specific gravity and volume of the water are changed considerably.

The small drops of mist turn into steam by kinetic confrontation with the sound of the flute and thus energy saturation.

The water is beaten approximately 5,000,000 times smaller in 3 to 5 seconds, at a speed of 160 Km/h and above, rising above the sound velocity. This depends on the maximum speed to be achieved, the circumference of the plates, the 80 different added frequencies.

The kinetic confrontation of more than ca. 1,690,000 per second gives a much higher peak frequency than the tones through the pan flutes. The Ultrasonic Hydrobooster can be fed with water or Honeywell's R-245Fa for better energy conversion.

The propagation of sound in water is 5 times the speed of sound in air (1500 metres per second). The water supply varies from 0.1 to 1.6 litres per second from small to large model Hydrobooster.

The higher the tones and number of whistles, the more kinetic force + sound will be added to heat the water. A smaller flute produces higher tones.

More steam increases the velocity of rotation.

These frequencies increase the energy and temperature of water molecules. The different frequencies come from the flute plates, the inside wall of housing and the implosion of the steam bubbles.

http://www1.lsbu.ac.uk/water/microwave_water.html .

https://www.youtube.com/watch?v=IceYPhXj0cY

1.6. Impeller

The impeller function is reversed as the operation of a pump impeller in this design.

The impeller therefore provides a driving function for water or steam.

The steam generated goes through the outputs (twice 1") to the Impeller output, propelling the shaft with plates. It accelerates in its already moving direction of rotation, causing self-provoked propulsion.

As a result, the Ultrasonic Hydrobooster requires less or no more thrust at the input of the system. The Ultrasonic Hydrobooster is more or less self-sustaining and can be controlled via the supply of water or R-245Fa, which already evaporates at 82°C.

When leaving the impeller drive, the steam will go to the next impeller, which drives an axle for an electric generator. The speed and force is reduced, so that the force increases as a result of the transmission ratio.

The increased pressure and volume (1:1600) due to the transition from water to steam and other natural properties of water play a role in this.

After the steam is used for electricity generation, it will pass through a heat exchanger for heat transfer. This can be cooling or heating for industrial applications.

1.7. Recirculation of electricity

A connected electrical generator will generate more energy than is necessary for the system to function. The generated electrical voltage will be fed back to the input in order to maintain itself. The excess electric power generated can be used for other purposes or discharged to the mains.

Experimentally it will have to be determined which application will be optimal for each configuration.

2. Testing & Electronic Process Control

The most important measurement is the temperature difference between incoming and outgoing water/steam and its volume. To apply the existing formula calculation to this, to recoup it with the added power to energy, which will create a difference factor.

It is preferable to carry out the first tests with water. Where we can vary output by management of the intake of water.

The offered temperature of this water and the energy extracted via a heat exchanger to store in a supply vessel / boiler must be measured.

By influencing the ∆T we can choose between applications for generating electricity or more heat will be preferred.

After the test phase with water, these tests can be performed again with a replacement for water, by Honeywell's R-245Fa.

These R-245Fa Not frozen until -24°C can easily reach our target temperature of between 82°C and 125°C. It must also be possible to set this for every application. Because of his characteristic new possibilities offers, after being filled once, this compound is a reusable source for energy production. The advantage of this is that there is no oxygen in this solution so the metal cannot and will not rust (corrode). This can lead to significantly lower production costs.

This entire system will be controlled and managed by electronics that have yet to be developed and will be influenced by the test results.

The following process properties and measurements and security are then brought together in a design, displayed and measured via a display:

1. Total energy used such as current, voltage, power of the drive pump or motor.

2. The water flow of the total system and drive pump.

3. The water flow that is offered to the Hydrobooster for heat generation.

4. The input pressure that the drive pump delivers.

5. The temperature of the water offered at the entrance.

6. The output temperature of the steam emitted from the output.

7. The steam pressure that comes from the Ultrasonic Hydrobooster.

8. A pressure protection via water supply control at the input.

9. A volume control of the water offered for heat generation.

10. Bluetooth web interface for operation and reading.

11. Reading out of outgoing energy from heat according to the energy formula.

12. Reading out of self-generated energy by the steam.

13. Reading out of the generated voltage and current by the generator of the system.

14. Displaying the total energy generated Heat and Power.

15. A conversion factor of energy input and energy output.

16. Feedback of generated current to the input of drive pump.

17. Storage of excess energy you generate or dump it back into the grid.

18. Calculate how much energy savings this system will generate on an annual basis.

19. Logging functions e.g. for energy flow rate and number of operating hours.

I have already developed the electronics for reheating the generated steam.

Where water is split into hydrogen and oxygen, this is immediately ignited to produce a plasma flame. This plasma technique can be used for different purposes.

This electronics also ensures that the power is adjustable by controlling the time of positive and zero. The duty cycle which is generally 50% positive and 50% zero, so a distribution of 25% positive and 75% zero can come. As a result of which the power consumption will decrease by 50%, this can be thermally controlled by incorporating an NTC resistor in the circuit.

Display of desired output signal

This circuit is controlled by two source signals. The lowest control signal available on port 14 of the 4017 divides the signal into 9 outputs.

The high signal first goes to an EN port to get more fan (load) out. The high signal is distributed over 9 inputs of 9 EN ports. The output signal of the 4017 IC is connected to the second inputs of the EN ports.

Each output of the EN ports will give a 1 if both inputs are 1, this will give the signal from the previous image. The IC LM311 and IC 555 provide the duty cycle and duration setting, the output goes through a NOF port from a 7408 to the Reset input of the 4017 IC.

The still free NOF ports of 7408 can be used for security in the control system. This can be a pressure protection or maximum temperature protection or a room thermostat or dry cooker protection.

I have chosen to control the 4017 IC for approx 450 KHz, which in this case will make a fundamental of 50 KHz, which is above the hearing limit of humans and animals.

Out of 9 control signal outputs via the 7408 IC, 9 FET drivers are used to control 9 signals in turn to control limit switches.

The load output is switched via the FET circuit to ground. With an overvoltage protection in the joint output, this is spaced with one diode per output for feedback to other outputs.

Digital circuit diagram display

3. Applications

The Ultrasonic Hydrobooster initially produces steam. When the central axis is coupled with a generator, the booster also delivers electricity. In combination with the customer's wishes and needs with this environmentally friendly application. One only needs water! The production of heat and/or electricity will therefore become significantly cheaper and the production costs of other products can be significantly reduced.

The field of application is therefore almost infinite. That is why I shall confine myself here to a brief overview of the possibilities.

3.1. Glasshouse horticulture

Greenhouse horticulture consumes lots of energy. In the Netherlands alone, there are approximately 250,000 hectares of greenhouses. The energy consumption is approximately 1 MW per hectare. Hot water is mainly used to heat the greenhouses in winter. A heat exchanger is therefore required for heating. The electricity from the turbine can be used to provide the lighting. It is possible to operate completely self sustained.

3.2. Process industry

Process industry uses a lot of steam to heat conversion processes into autoclaves. For example, in the sand-lime industry, where the stones harden in an autoclave at high temperature and humidity. Or in the food industry where steam is used.

Petrochemical industry, heat dissipating processes for various applications, energy storage for an indefinite period of time by a This makes new inventions possible.

It is also possible to use heat exchangers to heat air, such as industrial buildings. By combining the Hydrobooster with the air purification products of Swentibold BV, this is a possible market for their existing customers.

3.3. District heating

An increasing number of municipalities are switching to district heating via heat networks. Steam is used as the medium. The heat generated can be used to heat space and potable water. For example, between Arnhem and Nijmegen, the company is busy expanding its heat grid.

By using heat exchangers in the form of boilers, these can be linked to increase the storage capacity.

Swimming pools can be heated via the heat network, or a small Hydrobooster can be installed, another heat exchanger will be installed that can be used universally by linking these as required.

3.4. Residual waste disposal with plasma technology

The steam produced can further be processed into a very hot water plasma (more than 7000 ^oC). With this heat all matter can be gasified. At present, plasma gasification is increasingly being used for the removal of old waste dumps. In this way, residual waste becomes a source of energy.

3.5. Automotive sector

A small version of the Hydrobooster can be installed in an electric car. The steam drives a small turbine to charge the car electrically while driving.

Charge in standby mode when parked.

This will extend the range for hybrid vehicles. If facilities to keep a car frost-free can be combined with solar cells on the roof of the car, possibly incorporated in the panoramic roof.

The ability to keep the temperature inside the car stable even when it is not in motion.

By achieving a lower boiling point with Honeywell's R245Fa, there are new applications that can be used in the automotive industry.

This enables the new generation of fuel cells to be brought up to operating temperature quickly, from 15 minutes to approx. 30 seconds. For better and more powerful performance of the fuel cells.

Energy-consuming processes for various applications, energy storage for an indefinite period of time by a This makes it possible to create new inventions.

https://www.autobahn.eu/2892/waterstof-is-oud-iedereen-gaat-aan-de-poeder/

4. From Prototype to Product

The expectation is that the Hydrobooster is so revolutionary that it will quickly conquer the market through its broad applicability. By working together on the basis of confidentiality further developments can take place. It is very important to find the right partners on the path from prototype to product.

For the whole project, there will be a definition schedule of the steps to be followed to realize the development of the Ultrasonic Hydrobooster. This includes fundraising and business vision, and marketing as an important part of the process to be completed.

When generating and with this system a CO2 reduction of more than 80% is expected.

According to a calculation, this will yield 502.8 Kw/h of heat if the 1 litre per second of water is heated 120 degrees, at only 4.8 Kw of electric power added, by pump and drive motor.

Without using oil or gas to generate this form of 100% clean recyclable energy from water.

The development will take place with the cooperation of various factories in Europe, each of which will make different parts throughout Europe.

After development, the production will be set up, the aim being to let production follow demand.

There will be a production line to be set up in each country, for assembly by country.

For example, jobs will be created in each country for the manufacture, installation, transport and supply of various ancillary products developed by other manufacturers.

The first concept designs are currently being converted into the final size of the prototype of this modified Ultrasonic Hydrobooster.

Converting the design into a prototype will take place in several steps, in order to make the adjustments for each part in relation to each other. By doing so, I want to avoid double work pay and unnecessary material wastage.

The company that participates in the development of the Hydrobooster contributes both resources and competences. The development is carried out by a company to be founded, in which both the inventor and the business partner participate.

When applying for a patent, it is desirable to take equal action, to apply for subsidies. This is, after all, part of the investment, so that we will also be able to pay for part of the production at the time of the introduction.

The shortest route is an application where steam produced can be delivered directly to the customer, thus preventing transport losses. Industry is the largest consumer of energy for 80% of heat (steam and hot water).

This new technique can be combined with existing solutions.

By working together with Hogeschool Zuyd in Heerlen this concept of my idea, two students have worked it out in direct cooperation with me.

Also efficient use of the possible construction with composite solution will be a major material saving and cost saving. As development progresses, more opportunities will emerge and opportunities will arise for this unique form of energy generation for the future.

After the test phase with water, these tests can be performed again with a replacement for water, by Honeywell's R-245Fa.

These R-245Fa Not frozen until -24°C can easily reach our target temperature.

Between 82°C and 125°C or higher, it must also be possible to set this for each application, taking into account the self-igniting characteristic of 412°C or higher. Because of his characteristic new possibilities offers, after being filled once, a reusable source for energy production.

The advantage of this is that there is no oxygen in this solution so the metal cannot and will not rust (corrode). This can significantly reduce the choice of production.

As development progresses, more opportunities will emerge and opportunities will arise for this unique form of energy generation for the future.

If we compare the Ultrasonic Hydrobooster technology with other alternative clean applications such as solar collectors, wind turbines, heat pumps and ground heat, the Ultrasonic Hydrobooster will have a higher energy generation at lower purchase and operating costs.

At 80% CO₂ savings at named percentages see list below. However, as the generated voltage will be coupled back, the CO₂ emissions will decrease by approximately 99% or more. The market share mentioned here is a long-term forecast.

This calculation is based on the Ultrasonic Hydrobooster Model 125+, at startup the savings will be much lower, as the numbers will be much lower.

The actual market price depends in part on the other combined products. These are: Pumps, Heat exchangers, Heat storage vessels and boilers, Hot air Heaters, Separate Electric Motors, Type of electrical generator.

Annex 1: Resonance technology

NOTE: THIS SECTION IS TRANSLATED FROM DUTCH BY COMPUTER – PLEASE BE AWARE THAT WEIRD SENTENCES MAY OCCUR.

Current techniques in the field of heating make use of convection heat, combustion, electric coils or infrared radiation heat. With combustion as a chemical process, an energy development takes place that can be observed, in which the flames consist of several different colours.

The volume of combustible dust (mass) inlet velocity through a certain opening and mix with air that determines the amount of energy by a factor.

The rate of discharge at lightning, 150,000 Km/s equal to the half speed of lightning.

And, in turn, causes different chemical reactions through the combination of air, water and the heat of the discharges.

The different colours represent different Frequencies, where Frequencies are related to the time of a period of time:

Speed versus time is comparable to the timeline, the flying of circumference of a circle. The first figure shows a circle with the angles expressed in degrees. Figure two shows the progression in time of a period.

It is not yet possible to go from point 180° via 270° to 0° in time, which would mean that we would go back in time in this period. We express a period in time in terms of the number of Hertz per second.

A gas flame transfers energy to metal in the form of a cooker or heat exchanger in a central heating boiler.

The colours of the gas flame show where most of the energy intensity takes place.

Higher frequency, according to the colour spectrum and the corresponding frequency table, also play a role in this. Otherwise, it would never be possible to achieve the required temperature with a flame: see the corresponding frequencies in the colour spectrum table.

The gas flame transfers energy by means of vibrations to the metal.

The propagation rate of air, water and metal or ceramic substances for vibrations differ considerably from each other.

These range from low to very high, including frequencies that are not visible, from before and after the colour spectrum:

Think Steel can be Dust by to high frequenty 911

In case of heat transfer of different temperatures and substances, nature will have to increase in order to find a balance. Where these two want to come into balance and harmony with each other.

This is called resonance when the balance is reached where the frequencies are equal because the source and other object have the same rhythm.

The gas flame transmits its vibrations, whether or not visibly, in the metal an equilibrium is created. This transfer of energy can melt metals and materials, by energy saturation or even by evaporation.

Combustion of watergas has very special properties compared to other combustible gases, because it consists of two different elements...

Where released temperature is also determined by the hardness of the material with which it is confronted and tries to come into resonance (frequency balance).

Watergas consists of 66.6% hydrogen and 33.3% oxygen. Watergas has a higher optimal combustion rate of 3000 m/sec = 10,800,000 Km/h.

The frequency of this flame has a higher speed transfer, also due to frequencies outside the visible colour spectrum its ignition velocity of 3000 m/s.

Even these 3000 m/s is not only frequency determining, this frequency is much higher. What happens in nature, when discharged during a thunderstorm a mass of energy is released in this 1/3000 sec. If I want to make this visible with figures, I will have to make an estimate and assumption because it is impossible to measure.

Calculations show that up to 1 litre of water contains 12.92 Kw of energy, let me suppose up to 1000 liters when discharged 12,920 Kw releases energy in this 1/3000 sec.

This combustion developed so much heat in this short time, that another 2000 liters of water evaporates. This steam in combination with the hydrogen/oxygen combustion produces a plasma that we perceive as Lightning, which with 150,000 Km per sec seeks its way to a negatively charged place the earth.

This means that there is about 5000m³ air pressure displacement within 1/3000 sec a natural force of 38,760 Kw of force takes place. This electrical discharge phenomenon occurs approximately 8000 times a day.

Should this power be constant in this force for an hour, there would be 418,606,000 Kw/h of discharge taking place.

However, the estimate may also be higher if the assumption based on 1000 litres of water per discharge is not measurable, but it is a nice challenge for further research.

With the current technology, this natural disaster cannot yet be contained for exploitation; we can imitate it. If we were to make a calculation with Ohm's law if we had more data.

The conductivity of humid air, the power output and the corresponding current. Then we get an estimate of the voltage that caused this discharge.

The conductivity speed of the materials causes a higher temperature, which can rise to more than 7000°C, partly due to resonance from the previous explanation.

Water is capable of absorbing all frequencies to which it is exposed before and after the colour spectrum. A gas flame heats the metal, the metal in turn transmits the absorbed vibration to the water.

Water has a very special characteristic, that it will take over the frequencies it is confronted with. By energy volume and power of the frequency of these vibrations.

In a microwave, water vibrates to a higher frequency until it reaches saturation. At a resonance frequency of 2.45 GHz where cooking takes place and steam will pass into gaseous form.

This is pressure dependent in the environment where this takes place, 1 bar higher or lower so that the boiling point will vary considerably. Due to the difference in temperature on the side where the water absorbs its energy, (heat rises) due to a changing specific gravity.

A natural current is created by changing the density of water, I see the following phenomenon.

Where the water comes into direct contact with the supplied energy of the metal, this frequency will quickly rise to 2.45 GHz. This will cause an upward force and pressure difference, due to the difference in the different specific weight caused by temperature rise.

This creates a vacuum on the confrontation side of Water / Metal which creates steam bubbles of cavitation, which implode during the ascent.

This implosion also gives frequencies to the water, just as it did when the steam bubble came into being. The frequencies will have a peak ripple from its own evoked source tone of its origin, per flute and confrontation to the flute and inside wall of the Hydrobooster.

Annex 2. Cavitation is considered to be a Torus system

Water and pressure differences in water, is the reason why cavitation arises. Cavitation is the phenomenon that in a turbulent moving fluid the local pressure becomes lower than the vapour pressure of the liquid.

Where water only becomes gaseous at atmospheric pressure at 100°C, this occurs at lower pressure, at a lower temperature. This concerns the difference in pressure between overpressure and under pressure in this set-up. Due to the overpressure of over 2 BAR can and under pressure will be lower due to various factors.

On the under pressure side, steam bubbles of a lower temperature than 100°C are formed, which water at 1 bar would do at sea level. This has an impact on the frequency of the water because of the formation, but also because of the implosion of these gas/steam bubbles.

This releases energy that we cannot simply measure at the moment, such as Viktor Schauberger has applied in his models and experiments.

Besides the kinetic power that increases peak frequencies, we also have a breeding ground for cavitation steam bubbles. The ones at their implosion energy that cause very high frequencies and transfer to the water.

This results in an energy saturation at the different confrontation temperature and corresponding velocity. There, after all, towards the exit, more and more pan flute effects and confrontations occur within the Ultrasonic Hydrobooster system.

A Torus is a virtual representation of lines of force, with a zero point of energy in the centre. These lines of force move from the zero point to the exit from the centre.

To go back on the outside on the opposite side towards the centre and zero point. By increasing heat and 1600 times volume multiplication in steam as a result of more movement more energy is stored in the Torus.

As a result, each Torus has different frequency and vector, which is polar and magnetically and voltage sensitive. This polarity is eliminated by the resulting turbulence in the Ultrasonic Hydrocarrier.

This allows this charge of energy to be stored in heat. In conversation with Ir Dr. Coen Vermeren of Delft University of Technology and one of his students we discussed this phenomenon.

The student Ir, Alexander Klaessen, indicated that he had done tests in his studies to add frequencies to gas. To show that the gas by Frequencies to add heated frequency and temperature are proportional to each other.

Mark Le Clair http://www.waterjournal.org/uploads/vol5/supplement/LeClair.pdf

The steam bubbles are created and imploded by the cohesion effect of the water and adhesion on the confronting metal. Cohesion is the mutual attraction between equal molecules without any chemical bonding.

The movement literally pulls the water apart to create a vacuum and causes a steam bubble. This bubble causes twice a frequency / energy transfer when it is formed and implode and cannot be measured.

This causes the temperature to rise in water, which is also the case with air or gas. Although it is not possible to see and measure them directly, we do so in the design of the Ultrasonic Hydrobooster.

This will be a great challenge for university students to unravel more secrets and exploit new opportunities.

Annex 3. Consideration of the effect of hydrobooster

How can the Hydrobooster function be explained?

First explain the phenomenon of water in order to understand how the Ultrasonic Hydrobooster works!

When this generates the energy with water and its properties of water that is generated by movement. To begin with, water consists of two elements H2O which means two atoms of hydrogen with 1 electron each and an atom of oxygen with 8 electrons that orbit around the nucleus.

Separately, each has its own characteristics and properties as can be seen from the above description. Both combined are highly flammable and explosive and have different electron speeds at the same temperature.

This means that they do not automatically hook together in a separate gas form. This only happens in case of conflict reaction as well as in case of combustion. In which the different atoms combine to form monocul compounds.

Water is an exception to a chemical reaction, as it can return to elements compared to other substances or elements. If wood, methane, natural gas, etc. is burned, it cannot return to its monocular/atomic structure, which they consist of.

If the temperature of hydrogen is raised, the limit values between which a mixture of hydrogen gas and air is flammable are between 4 and 96 % vol. The temperature for spontaneous self-ignition of a hydrogen gas-air mixture is 585 °C.

As a result, the following are applied to hydrogen installations ATEX- rules are applicable. As a result, if a mixture of hydrogen and oxygen ignites 66.66% and 33.33%.

Because of this natural phenomenon a chemical process releases a lot of energy and a connection is made by both gases.

Whereupon again Water H2O conception and the atoms are interconnected again to form molecules of water. That has a completely different property as every single element hydrogen and oxygen.

Because of this phenomenon there is a cycle in nature than the influence of the Sun which through its photons production and radiation determines us again. Provide us with freshwater in nature for Man Animals and Plants.

By discharging energy many free electrons are released, by this brutal force the Schumann resonance of 7,83Hz . Which we can regard as the heart rhythm of the earth because of the worldwide discharges of thieves.

The one-pressure displacement in 1/3000 second takes place at a rate of more than Mag-9. This pressure wave between the earth and the ionosphere causes a sine wave that allow free electrons to move with you.

Ozone naturally occurs in the atmosfeer atmosphere under the influence of electrical discharges (such as during thunderstorms). This discharge is also known as ionizing the air, which then becomes neutral from electrical charge.

Due to the high temperatures of lightning more chemical processes occur such as the formation of helium from hydrogen. Equivalent responses to a nucleaire fusion Redaktion which releases a great deal of energy, forms the basis of the energy of stars but also that of the Atomic bom.

The Sun in combination with the water make it possible for there to be life on earth. Where we as humans are a chemical hydrocarbon compound of 30% / 70%, we are living walking the chemical reactors.

Those who provide us with life's energy, then it is not strange that the Sun and Water used to be venerated as a God as the source of life. Without Sun and Water, life is not possible for us to keep our chemical process up and running.

Water and Sun energy for us the first lives need to be. Water has the property that it will take on the frequency with which it is confronted. Furthermore, it tends to attach itself to everything, is very easy to deform and has three aggregation states.

At a pressure of 1 BAR, solid between -273°C = 0°K and 0°C = 273°K, liquid from 0.1°C to 100°C, gas from 100.1°C and above. Volume differs in these three forms, so that the specific weight differs in these three states. Water has the smallest volume at 4°C, and with steam it will increase 1600 times in volume.

The parameters of the Ultrasonic Hydro-Boster differ in this respect:

1: Speed of the impeller,

2: Water pressure,

3: Moved volume, mass.

4: Speed,

5: Friction by resistance

6: Difference of confrontation metals and water, each of which has its own sound spectrum (frequency transfer) by the composition.

7: Form of the metals used and thickness of these metals.

This is the reason why an energy calculation is not possible at this stage of development for the Ultrasonic Hydrobooster.

Where they arise in the combination of different applications of Viktor Schauberger, custom design of Nikola Tesla water turbine. This, in combination with Ultrasone Hydrobooster's own self-propelled design, cannot be calculated. With the current technology and knowledge of these substances in relation to the existing formula.

However, we will soon be able to attribute a factor to an existing formula when we look at what energy comes from, and what quantity is needed to make this system work.

https://www.youtube.com/watch?v=S-4Yu3pB_dk

Atoms are the building blocks of our universe.

The above picture list with all known atoms has different properties.

A nice explanation about Atoms can be found here.

Water is a chemical compound of Hydrogen H2 and O.

The number of electrons in the outer ring is called free electrons, with O (oxygen) this is 6 and 2 around the atomic nucleus. With Hydrogen H (Hydrogen) there is only one electron that moves around the nucleus.

Individually they have a different atomic weight, so they also have a different electron velocity relative to each other. For me it is therefore clear that here a monoculul difference causes the internal tensions.

From experience we know that Water attaches itself to everything, through the cohesion that is created by the different atomic weights and speeds that are linked to each other.

This property can also be seen in Koper Cu and Tin Sn, both types Brons, This bronze is harder and more durable as copper or tin. This results in the chemical to merge, so you can't get it back or split it into copper or tin.

In addition to the different atomic properties, atoms also have different tensions if they are confronted with each other in aspects of each other. Aluminum 13 of these have 3 free electrons that can move, which is why Aluminium is also a good conductor.

Copper has 29 electrons revolving around its core, of which in the outer ring only 1 free electron.

When these two conductors meet A voltage difference occurs of 2,04 Volt.

Both also have a common characteristic that they are Non Fero, so they are not magnetic, but they can generate magnetic fields when a current passes through them.

Nikola Tesla, for example, has been able to transfer voltage using the properties created by the cycle of water in nature.

Thanks to the water we have through the sun radiation is a natural water household, so there are about 8000 discharges per day, this is the cause of the earth frequency that causes the earth frequency by the chemical and electrical reaction.

At this earth frequency, the Longitudinale Wave many free electrons in a stretch pattern of this frequency move in the same direction, so that they are not measurable, unless they are captured through a Tesla coil.

These free electrons are again coupled to atoms, causing a voltage current to be generated, as is the case with a lightning discharge.

In this way ozone as a result of lightning and voltage depletion, including free ions get out.

The miraculous thing about atoms is that they have an agreement on the whole universe and equal effect through the mutual forces.

Loads, fields of force, polarity in all building blocks and frequencies occur from the whole cosmos. The sun which has a different structure and structure as the earth by its gas core, which allows the fusion to create photons, which take about 150,000 to reach the outside of the sun, and they can escape as energy and light Radiation.

Definition of Time.

We humans have taught ourselves a measure of unity in which we have also given time a definition. This is achieved by a rotation around the sun, that is how we call this a Year, from which Months, Days, Hours and Seconds are processed in a calculable unit.

Now this is relative from earth to sun. Let's take Pluto, it turns on the sun once in 248 earth years. As a result, a pluto year, month, day, hour and second is as large as 248 in the time unit.

Let's take our solar system that travels a cycle through the univers will be much more time-consuming.

The examination of the clay tablets by dozens of researchers, who have tried to translate these into our current language form, tell us that the earth was created by a collision between two heavenly bodies.

Of which one, one has a cycle of about 3600 earthly years called SJAR, for that planet a SjAR and Day definition is much different than our perception and standard.

For our way of thinking this is a completely different dimension, in which speeds are defined differently, which means that we still have a lot to learn in order to understand all natural phenomena properly.

Our definition of the speed of light may well be correct for us in our frame of mind, but it will be a totally different interpretation from another dimension.

https://www.youtube.com/watch?v=T0gBuY7UeQI

https://www.youtube.com/watch?v=ncphh8FWUUE&t=67s

How work a atom

https://tweakers.net/nieuws/76949/cern-meet-deeltje-met-snelheid-hoger-dan-licht.html

https://www.ad.nl/nieuws/deeltjes-opnieuw-sneller-dan-licht~ac536079/

https://www.scientias.nl/cern-deeltje-reist-sneller-dan-het-licht/

https://www.nu.nl/wetenschap/2671176/deeltjes-opnieuw-sneller-dan-licht.html

https://www.nemokennislink.nl/publicaties/sneller-dan-het-licht-deeltjes-gevonden-1/

CERN scientists may have made a special discovery, namely that particles travel faster than light. The scientific community is in doubt. Is Albert Einstein's theory of relativity not correct or is it a system error?

Physicists use the OPERA detector to detect these particles. Particles are accelerated in CERN's well-known particle accelerator and then race to OPERA, which detects neutrinos. The GPS data from the OPERA particle accelerator show that the average neutrino travels a distance of 732 kilometres in 2.43 milliseconds. That is about 60 nanoseconds faster than expected if the particles travelled at the speed of light.

Neutrino

Skip to navigation Skip to search Skip to search

The neutrino is an electrically uncharged subatomic, elementary particle. It has a spin of 1/2 and is therefore a fermion.

The neutrino is a lepton. The main interaction that neutrinos show is the weak nuclear force: neutrinos are not sensitive to the strong nuclear force or electromagnetic interactions. Because the neutrino shows so little interaction with matter, it passes almost unhindered through ordinary matter. A block of lead should be one light year (about 9.5 trillion km) thick to stop half of the neutrinos passing through it.

Most neutrinos that reach the earth come from the sun. Per second every square centimeter of space near the earth, which is perpendicular to the direction of the sun's rays, is passed by 65 billion solar neutrinos; these are electron neutrinos.

Naar navigatie springen Naar zoeken springen

Het neutrino is een elektrisch ongeladen subatomair, elementair deeltje. Het heeft een spin van 1/2 en is daarmee een fermion.

Het neutrino is een lepton. De voornaamste wisselwerking (interactie) die neutrino's vertonen is de zwakke kernkracht: neutrino's zijn niet gevoelig voor de sterke kernkracht of elektromagnetische interacties. Doordat het neutrino zo weinig wisselwerking vertoont met materie, gaat het bijna ongehinderd door gewone materie heen. Een blok lood zou een lichtjaar (circa 9,5 biljoen km) dik moeten zijn om de helft van de neutrino's die erdoorheen gaan tegen te houden.

De meeste neutrino's die de aarde bereiken, zijn afkomstig van de zon. Per seconde wordt elke vierkante centimeter van de ruimte in de nabijheid van de aarde, die loodrecht op de richting van de zonnestralen staat, gepasseerd door 65 miljard zonneneutrino's; dit zijn elektron-neutrino's.

Hydrogen atom

A hydrogen atom is an atom of the chemical element hydrogen. The electrically neutral atom contains a positively charged proton and a negatively charged electron, which is bound to the nucleus by the coulomb force. The most common isotope, protium (also called hydrogen-1 or light hydrogen), does not contain neutrons; other isotopes of hydrogen, such as deuterium and tritium, contain one and two neutrons respectively.

Waterstofatoom

Een waterstofatoom is een atoom van het chemische element waterstof. Het elektrisch neutrale atoom bevat een positief geladen proton en een negatief geladen elektron, dat aan de kern wordt gebonden door de coulombkracht. De meest voorkomende isotoop, protium (ook waterstof-1 of lichte waterstof genoemd), bevat geen neutronen; andere isotopen van waterstof, zoals deuterium en tritium, bevatten respectievelijk één en twee neutronen.

Oxygen is a chemical element with symbol O (from Latin: oxygenium) and atomic number 8. It is a non-metallic element belonging to the oxygen group (group VIa or group 16) in the periodic table. Oxygen occurs as a single substance mainly as a dizzyme (O2) in the atmosphere. In compound form, it is also a widespread element because all ocean waters and all silicates that make up the earth's crust contain oxygen. Measured by weight, oxygen is by far the most common element in the human body, consisting of about 65% oxygen (mainly as a building block of water).[1]

As a gas, oxygen is colourless, odourless and tasteless. As a liquid, it is light blue in colour.[2]

Zuurstof is een chemisch element met symbool O (Uit het Latijn: oxygenium) en atoomnummer 8. Het is een niet-metaal dat tot de zuurstofgroep (groep VIa of groep 16) in het periodiek systeem behoort. Zuurstof komt als enkelvoudige stof vooral als dizuurstof (O₂) in de atmosfeer voor. In samengestelde vorm is het eveneens een wijdverspreid element omdat alle water van de oceanen en alle silicaten waar de aardkorst uit bestaat zuurstof bevatten. Gemeten naar gewicht is zuurstof veruit het meest voorkomende element in het menselijk lichaam: dat bestaat voor ongeveer 65% uit zuurstof (voornamelijk als bouwsteen van water).^[1]

Als gas is zuurstof kleurloos, geurloos en smaakloos. Als vloeistof is het lichtblauw van kleur.^[2]

The images above are for the imaging.

When electrons rotate around a nucleus, the electrons themselves will also rotate around their own axis, creating force fields and lines that keep each other in balance.
These are separated from each other by the electromagnetic field they generate themselves so as not to collide with each other.

An electron can only rotate around a nucleus if it is set in motion by a natural source of electromagnetic energy through the nucleus that will then have to rotate much faster, in opposite directions when the electron rotates around its own imaginary axis.

If my calculation is correct, then the speed of a Neutrino is 55 times faster than light (Photon), I have 300,000 km/sec and 1 : 0.0000000006 = 16,666,666 km/sec = 55.55 times faster calculated with the 60 nano seconds which is the neutrino faster in place than expected.
If I have made a think or calculation error here I like to hear it.
I have the strong suspicion that the nucleus of an atom is rotated by the Neutrino, because if there are 65 billion of the sun alone that are released from it, then we have not even counted the remaining radiation from other stars.

Then I miss another flaw in beauty, the temperature factor in this story.

You wouldn't say it if you look at the things around you like this, but matter consists mainly of empty space. So also an atom. But how much empty space does such a particle consist of?

Take an atom from the simplest element: hydrogen. It consists of two particles: a proton, which forms the atomic nucleus, and an electron, which (kind of) circles around it. The distance between those two particles turns out to be enormous: if you enlarge the proton to the size of an orange, the electron is at a distance of no less than 5 kilometers. So the rest of the atom is basically empty.

Would you think away all that 'superfluous' empty space from atoms, then suddenly matter takes up much less space. For example, complete humanity can then be compressed into a cube the size of a sugar cube.

It will be clear that this is impossible, because our EGO needs more space. (Smile) https://www.youtube.com/watch?v=WEb2xMBRiHo

The speed of the earth core rotation is 20 minutes 27 seconds with the diameter of 1200 Km, the outside rotation speed is more like MAG 9, this creates the by the various elements friction the earth magnetic field with a power of about 500 MEGA Watt/h

The Earth rotates to the east, and takes the earth's crust with it as a slipping clutch so that it rotates for about 24 hours. The ionosphere has a temperature on the sunny side of ca 2260 Kelvin, and on the shadow side ca 10 Kelivin. The radiation from the sun is broken by the prism effect that water has on light. (rainbow) so harmful radiation is stopped.

If my logic is correct that with hard elements the throughput frequency is higher, we have 3 aggregation states, solid liquid and gas. Then it seems to me that the weather can never come from the west apart from the Coriolis effect.

https://www.nationalgeographic.org/encyclopedia/coriolis-effect/

We know how the schumann resonance comes about, thanks to the number of discharges per 24 hours all over the world. This has always been 7.83 Hz.

Now it is many times higher, which makes the bridging in our sleep state much higher because our brains then switch back to 4 Hz. Therefore we could process more data because this frequency is now higher.

I do have a possible explanation for this.

Dear Students I hope you will appreciate my info.

Kind regards

Zoeken in deze blog

Ultrasone-Hydrobooster

Content

Curriculum Vitae